P.O. Box 17062 CLEARWATER, FL 33762
PH. 1-800-966-0614 FAX 1-727-572-9926
PH. 1-800-966-0614 FAX 1-727-572-9926
www.floridawaterblast.net
Search for Products
... Thermo Oxidizer 150
WATER TREATMENT SYSTEMS
The Thermo-Oxidizer is controlled by a combination PLC and UL/FM approved microprocessor based
Flame Safeguard Controller. Visual confirmation of the Thermo - Oxidizer status is provided by LCD
displays, indicator lights, and digital temperature displays. The 2,500,000 BTU stainless steel burner
nozzle provides the energy necessary for the waste combustion. A Teflon air diaphragm pump pres-
surizes the wastewater for injection into the air atomization nozzles. These nozzles incorporate a
PLC controlled pneumatic cleanout system. The waste stream is thereby atomized directly into the
combustion chamber where it is completely oxidized. The TO 150 incorporates an outer shell which
acts as a preheat plenum reducing thermal loss and increasing efficiency.
Flame Safeguard Controller. Visual confirmation of the Thermo - Oxidizer status is provided by LCD
displays, indicator lights, and digital temperature displays. The 2,500,000 BTU stainless steel burner
nozzle provides the energy necessary for the waste combustion. A Teflon air diaphragm pump pres-
surizes the wastewater for injection into the air atomization nozzles. These nozzles incorporate a
PLC controlled pneumatic cleanout system. The waste stream is thereby atomized directly into the
combustion chamber where it is completely oxidized. The TO 150 incorporates an outer shell which
acts as a preheat plenum reducing thermal loss and increasing efficiency.
PRODUCT DESCRIPTION
Dimensions: 9'8"L x 8'D x 10'H
Electrical: 220VAC, 20 Amp, 1 or 3 phase
Weight (Approx): 20,000 lbs.
Disposal Rate: Up to 150 gallons per hour
Construction: 3/16" Steel Plate, Ceramic Lined, Stainless Steel Door
Air Supply Requirements: 15 CFM @ 100 psi.
Typical Temperature Settings: 800-1,400F
Burner Safeguard Control: UL,CSA Listed, FM and IRI Approved
Flame Monitor: Flame Rod
Exterior Finish: High Temperature Two Part Polyurethane
Electrical: 220VAC, 20 Amp, 1 or 3 phase
Weight (Approx): 20,000 lbs.
Disposal Rate: Up to 150 gallons per hour
Construction: 3/16" Steel Plate, Ceramic Lined, Stainless Steel Door
Air Supply Requirements: 15 CFM @ 100 psi.
Typical Temperature Settings: 800-1,400F
Burner Safeguard Control: UL,CSA Listed, FM and IRI Approved
Flame Monitor: Flame Rod
Exterior Finish: High Temperature Two Part Polyurethane
SPECIFICATIONS
Click Here For More On
Evaporation Operation
Evaporation Operation
Thermo Oxidizer 150